modernjewelry4u.com

The use and maintenance of pneumatic fittings

by

yiyi

Broadly speaking, pneumatic air motor driven mainly using compressed air output of the kinetic energy of the external work of a tool, in accordance with its basic work can be divided into: Rotary (eccentric movable vane). Reciprocating (piston volume ). General pneumatic fittings mainly by the power output section, the operating format conversion part, intake and exhaust road section to open and stop the operation control part, tool case and so the main part, of course, the operation of pneumatic fittings must also be part of the energy supply, air filtration and pressure regulation parts and tool accessories.

Power output section: it is the major component parts of pneumatic fittings, mainly composed of air motors and power output gear, which rely on high-pressure compressed air blow motor rotor blade Ershi motor rotation, the external output rotation and driven by gear some form of transformation of the entire operation movement. By stator and rotor are concentric, pneumatic air motor can be divided into concentric horse motor and the eccentric motor, according to the number into the number of stomata, pores can be divided into single into the motor, dual air intakes into the pores over the motor and motors. No matter what form of motor, are blowing compressed air motors rely on rotating rotor blades drive the motor at high speed rotating blade, the moment of friction with the stator wall, which is the most common vulnerability in the motor components, and thus it The quality of the compressed air and compressed air containing oil molecules are very demanding.

Some form of conversion operations: it is mainly the motor output of the rotation transformation accordingly. In the automotive industry, due to the way many thread connection, most of rotation, of course, there are linear reciprocating motion. For different types of pneumatic fittings, operating some of the major forms of transformation into mechanical clutch and planetary gear set, friction plate type clutch and planetary gear set, hydraulic cylinders, torsion bar and hammer block groups, etc.. These components are based on the importance of rotating parts, which determines the pneumatic fastening tools, torque size, speed speed, accuracy and other important parameters of tightening, because it kept the clutch, pressure or torque change, so it the composition of the components susceptible to damage.

Intake and exhaust road parts: Clearly, compressed air into the exhaust way out of the relevant part of the channel is to protect the normal movement of the motor energy supply system.

Open and stop the movement control section, which is usually referred to pneumatic switch, as it always and operators and direct contact with external objects, and many plastic products, it is easily damaged.

Energy supply parts: compressed air is mainly compressed air compressor to the atmosphere formed by compressed air piped to the relevant gas power, and was pulsating like.

Air filter and pressure regulator part: As compressed air is usually carried out through the delivery pipe seamless steel pipe manufacturing, in the long-term use, its inner wall corrosion materials, compressed air moisture, dust, etc. will continue to form. If such a compressed air without any treatment, directly into the motor, the motor will result in shortened life expectancy, thus causing the entire power output of the tool inadequate and unstable, easily lead to damage to motor and other parts of the phenomenon of a chain, this in compressed air from the pipeline between the pneumatic fittings to be set up compressed air filtration, conditioning, pneumatic triple parts of the task undertaken. Mainly by the pressure gauge pneumatic triple parts, filter, lubricator, regulator and other components, including filters built into the filter, in use for some time to conduct maintenance cleaning, periodic replacement.

Tool attachment: This tool attachments is installed directly in the pneumatic body in direct contact with the workpiece tool, pneumatic triple parts of the task undertaken. Mainly by the pressure gauge pneumatic triple parts, filter, lubricator, regulator and other components, including filters built-in filter, used for some time to conduct maintenance cleaning and regular replacement; this compressed air is not any treatment, directly to motor, the motor will result in shortened life expectancy, thus causing the entire power output to tools inadequate and unstable, easily lead to damage to motor and other parts chain phenomenon, for which the compressed air by the pipeline to between the pneumatic fittings, air filters must be set to regulate the devices, including various types of pneumatic sleeve, then shot, adapter, head and so on.

Cixi Poolke Hydraulic & Pneumatic Co.,Ltd is a professional manufacturer of hydraulic quick couplings,pneumatic quick couplings and

pneumatic fittings

.With a specialized staff and advanced production equipment, the company is capable of ensuring the customers to meet their needs for new product development, design and manufacturing etc.

Article Source:

ArticleRich.com